Results 1 to 2 of 2

Thread: Need center trunnion Powermatic 66 10inch saw

  1. #1

    Unhappy Need center trunnion Powermatic 66 10inch saw

    In tearing down my recently purchased 1980's era Powermatic 66 10inch cabinet saw, I learned that the gear on the center casting and specifically the center trunnion was in terrible shape!

    Several inches of teeth are broken.

    I am looking for a replacement the part number is 3810018.

    If... Anyone who knows where to find this part would be great

  2. #2
    Join Date
    Feb 2007
    Location
    Moscow, Idaho
    Posts
    294
    Powermatic still sells some parts for older machines, so you can check to see if they stock that part. Otherwise you can look for a used part through Redmond Machinery or by joining the owwm.org forum and posting in the classifieds section there.

    --Geoff

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •