Originally Posted by
Don Kondra
Do you know how big an impeller you have ? Or the amp rating of the motor ?
FYI > I dragged 20' of 4" hose around for years, it also "worked fine"
Adding the SDD and going to a 5" main actually increased performance.
Cheers, Don
It's a Laguna and the motor is rated at 12 amps at 240V. The input port on the Laguna is 6". I don't know the impeller size but you can look up the Laguna. It's a permanent installation with S&D 6" pipe running to the tools. Most are stepped down to 4" to match the port on the tool. I put the SSD XL in front of the Laguna because the Laguna cyclone was miserable and too much swarf and fines wound up in the filter. The SDD XL made a significant improvement in swarf and fines capture.
By "works fine" I mean that it collects swarf off my tools in an acceptable manner. Don't know what else to say.
Mike
Last edited by Mike Henderson; 08-22-2017 at 2:35 PM.
Go into the world and do well. But more importantly, go into the world and do good.
Reply With Quote
