I am building a Sellers-style workbench. The stretchers join to the legs using through tenons. One of my tenons is about 1/8" proud (I'm new at this) and another about half that. The leg face where these tenons protrude will be inserted into a dado in the side apron, so the tenons can't stick out. What's the best way to trim these flush? I haven't glued up yet so I still have the option of trimming before assembly. Obviously looks don't matter in this case, but in the future I might build something where they do. Oh, and I don't yet own a flush-cut saw.
Thanks, Herv