After many years of service, my table saw outfeed table was long in the tooth. A little sag made it iffy as an assembly table, it was to small for the large projects I've been doing, and I finally bought a real router table so no need for the outfeed/router combo. The new table is dead flat and very spacious. Makes things ever so much easier.
Before and after:
Table 1.jpgTable 2.jpg
The new table is the Kreg Universal Bench 28 x 64", the top is two layers of Euro multiply, laminated with 1/16" thick plastic laminate, and surrounded with maple trim. I added four pieces of angle iron under the top to prevent any future sag.
I have to say I am impressed by the quality fit and finish of the Kreg rails, made in USA. No flaws, no issues, perfect powder coating, and everything fit beautifully with no need for me to tweak this or that. Heavy duty steel rails and hardware. The table is rock solid, not a hint of movement. And thanks to all the forum members who gave me advice on the laminating.
Len