Major Upgrade - Outfeed and Assembly Table

[Len Rosenberg]

I am a huge fan of the kreg benched. I have received a lot in the last 6 months. I have built two 64x28 setups and a 20x20. One 64 is a solid core bench with additional 1.5 mdf and 1/4 hardboard with a record vice and cherry wrap. Another is three kreg klamp tables with a 64 trak along an edge. The 20x20 was temp and will become larger - no perm top on it Peachtree had 20x28 with casters for $149 and i bought several of those. That is a free set of their casters.

Yikes Mike you must have a big shop!!

[Len Rosenberg]

I have all sorts of jigs with rails that need slots cut, my large cross cut sled needs the most. I could not function without slots.

I designed the table with a 2.5" top overhang all around and 90% of what I do I can do by clamping the wood to the top with parallel or other clamps. For situations requiring other clamping solutions, I have a Festool MFT/3 table just across from the assembly table, with lots of options, so haven't needed to cut slots in my new table.