Anyone know if there is an alternative to the Trotec Rotary. I have a Speedy 300 80 watt and Trotec rotary is 1,500.00 plus shipping.
Wondering if some other company offers a unit that would work with Trotec.
Thanks
Anyone know if there is an alternative to the Trotec Rotary. I have a Speedy 300 80 watt and Trotec rotary is 1,500.00 plus shipping.
Wondering if some other company offers a unit that would work with Trotec.
Thanks
Trotec 300 80 watt ** on order**
Laguna IQ CNC Router
I know it's a big chunk of money but rest assured, it's worth every penny! Anyone who has one will tell you it's a fine piece of machinery and is built like a tank!
You spent the money to get the best laser engraver--don't cheap out on the rotary device. Gary is right--it'll pay for itself many times over in the first year.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
thanks for the input, I guess I will just bite the cost and I am sure I will find the quality an par with the Laser
Trotec 300 80 watt ** on order**
Laguna IQ CNC Router
I have the multi setup rotary on mine and it paid for itself within the first 2 orders. Wouldn't be without it now even though it sits there and collects dust, it's only used once every couple of months
Engraving Tools
Trotec Speedy 300 75w
Trotec Speedy 100 60w
Bodor 30w Galvo Fiber
Roland EGX-600
Econoline sandblasting cabinet
600mm Heater strip
Printing and Vinyl
Mimaki JV33-160
Mimaki CG-160FXII
Mimaki UJF-3042
1600mm Heat Assist Laminator
Talon Digital Finishing System
Software
Coreldraw X5
Cut 2D
So I ordered and received the Trotec rotary, look nice. No instructions or manual.
Can not find one on line. Anyone have one ??
thanks
Trotec 300 80 watt ** on order**
Laguna IQ CNC Router
Page 38 on this manual just might be it.
https://www.troteclaser.com/fileadmi...-Manual-EN.pdf
The manual makes it seem harder than it really is, it's quite easy to use once you get used to it. Your signature has "on order" by your Trotec, do you have one yet?
If I have time over the next few days I could probably shoot a quick video that outlines the basic steps to do something like a Yeti or Rtic mug with a simple graphic and text. From that you could figure out pretty much anything else. If I get the time to do it I'll post it in a new thread so it's easy to find.
Just remember not to hot-patch the rotary with the Trotec powered up. Do the plug in connection with the engraver powered down. Trust me, learned the hard way: $600 will buy you a new board for the rotary.....
See if this link helps:
https://www.youtube.com/watch?v=-9nTd5LmFuo&t=183s
When I bought my Speedy 300, got it with the rotary. No instructions, but was told " DO NOT PLUG IT IN OR OUT WITH THE MACHINE RUNNING!" The rest is sort of common sense. Great pc. of equipment!