While waiting for glue to dry, thought I'd try a first attempt at making a replacment chisel handle sans lathe. Grabbed a piece of 8/4 hard maple and cut a blank, planed it square and then planed down to 16 sides.
[OP]
Friend of the Creek
While waiting for glue to dry, thought I'd try a first attempt at making a replacment chisel handle sans lathe. Grabbed a piece of 8/4 hard maple and cut a blank, planed it square and then planed down to 16 sides.
Last edited by Phil Mueller; 03-21-2017 at 12:33 AM.
Posting Permissions
Reply With Quote