Results 1 to 8 of 8

Thread: Laguna lasers

  1. #1
    Join Date
    Aug 2012
    Location
    Sun City West AZ
    Posts
    123

    Laguna lasers

    Any body use Laguna lasers? They are glass tubes with chillers, no doubt imports but was wondering if anybody is working with them and what software they are using?
    GARY ROBERTS
    ShopBot Desk Top
    Full Spectrum 60 Watt Pro

  2. #2
    Join Date
    Mar 2014
    Location
    Ankeny Iowa USA
    Posts
    2,400
    Quote Originally Posted by gary l roberts View Post
    Any body use Laguna lasers? They are glass tubes with chillers, no doubt imports but was wondering if anybody is working with them and what software they are using?
    Gary its probably your typical Chinese laser, made to whatever spec's or lack of spec's the seller wants, along with a creative name. Your going to have to figure out what brand of control system they put in it and what software they are currently using. Info on here about those brands if you search. Found in 20 seconds with a Google Search > http://lagunatools.com/cnc-laser/
    Last edited by Bill George; 03-21-2017 at 8:05 PM.
    Retired Guy- Central Iowa. , Ray Fine 20w Galvo Fiber laser , LightObject 40w CO2. MakerGear M2 3D Printer. Qe60+ Vinyl cutter.

  3. #3
    Join Date
    Jan 2017
    Location
    Sudbury, Ontario, Canada
    Posts
    59
    Looks like the same supplier that Logilase gets theirs from. http://www.logilase.com/all-products.html

  4. #4
    Join Date
    Jan 2017
    Location
    Sudbury, Ontario, Canada
    Posts
    59
    If it is the same, and it looks to be, then it is using RDWorks8 and here is a picture off the website of the controller.Control-panel_0lqit2m7.jpg

  5. #5
    They are Bodors
    Poof! and just like magic the shop keeper dissappeared

  6. #6
    Join Date
    Dec 2006
    Location
    S.W.Wisconsin
    Posts
    61
    Yep, Dave is right! They are Bodors!

  7. #7
    Join Date
    Oct 2014
    Location
    Cleveland OH
    Posts
    160
    IMG_0664.jpg

    I just bought a Laguna smart shop router about a 2 months ago and the Tec that came out to install it said the control on there lasers matched my lasers controller (camfive). It's a new series of machines they just got into from what the tec said. If it's anything like there smartshop machine than it's well built. I haven't seen the lasers in person but I have seen there routers and plasma in action and they work great. There tec support is really good too, not as fast as camfive but good.
    If you have keep an eye on there website they had alot more options for different laser machines about 2 months ago and now it looks like they dropped it to 5 CO2 machine setups from I think 9.
    Last edited by Robert Bonenfant; 03-22-2017 at 9:24 PM.
    3X Camfive 1200 48" x 24" 100watt Tube
    Zcorp 450 3d Printer
    Laguna Smartshop 2 - 4x8 ATC

  8. #8
    Join Date
    Aug 2012
    Location
    Sun City West AZ
    Posts
    123
    Thanks everybody. I would think, perhaps they will be at AWFS in Vegas this summer.
    GARY ROBERTS
    ShopBot Desk Top
    Full Spectrum 60 Watt Pro

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •