Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17

Thread: Fiber Laser setup

  1. #16
    Join Date
    Oct 2013
    Location
    Seattle, WA
    Posts
    1,664
    Blog Entries
    1
    So here is a silly question for you fiber fans! On a Chinese glass tube laser you all have found that the differences between two machines, even identical machines, are sometimes enough to make settings that work great on one machine pretty tenuous on the second machine. Do you find with the fiber that the settings are more useable directly from one machine to another? As always....just curious!
    900x600 80watt EFR Tube laser from Liaocheng Ray Fine Tech LTD. Also a 900x600 2.5kw spindle CNC from Ray Fine. And my main tool, a well used and loved Jet 1642 Woodlathe with an outboard toolrest that helps me work from 36 inch diameters down to reallllllly tiny stuff.

  2. #17
    Join Date
    Dec 2010
    Location
    NW Arkansas
    Posts
    1,951
    Blog Entries
    1
    I expect there is some difference, but I think they are more similar at least power ratings, than glass CO2. I have a couple of days experience, but I have taken settings off of here and a couple of other locations and they have worked.
    Woodworking, Old Tools and Shooting
    Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
    SFX 50 Watt Fiber Laser
    PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
    Powermatic 100-12 planer, Rockwell 15-126 radial drill press
    Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
    Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •