Clear Vinyl Curtain Partition

[Brad Swanson]

I would like to separate my workshop from the rest of my basement using heavy vinyl curtain. Any recommendations on suppliers for such curtains that are on the economical side. My online research only turns up very heavy duty material that is over $300 for a 12' wide curtain of sufficient height (8.5 ft). Thank you.

[Steve Eure]

How about clear plastic sheeting similar to what they put down on floors and walls when building houses. Used as a vapor barrier. Some of the plastic is thick and a whole lot cheaper than heavy rubber curtains.

[Jim Becker]

ULine may have what you need.

[Mel Fulks]

Only bought the stuff once. Yes ,expensive then, only way we found to save any money was to buy it in rolls and make our own "curtains".

[Bob Falk]

I bought a clear vinyl curtain to separate my shop from the rest of the garage and it works well. I bought from:

https://www.curtain-and-divider.com/

I seem to recall that it was about $500 for a 24' curtain, but it was money well spent as it rolls easily, was dirt simple to install, and is high quality.