I've had a couple weeks of free time between projects for other folks and been trying to use the time to do some upgrades on my shop. I posted a new assembly table I built a couple weeks ago, today I finished a new router table, thought I would share. My old table was my first built several years ago, had a Rockler laminate top & fence with a Woodpecker lift & PC 7518.
I built the new table from 3/4" birch ply and is 24"x36"x43h" on 3" casters. It has an Incra 17" positioner/fence and Incra 27"x43" laminate top. I moved my PC7518 into the new table with a new Incra Mast lift. I already appreciate all the storage available in the five drawers instead of the two in the old table. Now I need to read the instructions and figure out some of those fancy joints Incra promotes in their advertising. Here's a couple photos of the new & old tables.
router table 1.jpgnew & old router tables.jpg