My 6 foot folding rule broke, but fortunately it broke at the middle hinge.
Now I have two folding yardsticks, one with a 6" sliding extension.
The folding yardstick fits in the nail apron nicely.
My 6 foot folding rule broke, but fortunately it broke at the middle hinge.
Now I have two folding yardsticks, one with a 6" sliding extension.
The folding yardstick fits in the nail apron nicely.
Lufkin? If it is, you and I may be the last two who use such a thing. I started as a carpenter many years ago using Lufkin folding rulers and have never been able to get comfortable with a tape measure unless I am going for long length measurements. It is a sad day indeed when a well broken-in folding ruler is broken. "Broken-in" is a way different animal than "broken". I can still hear the old lead carpenter saying, "damn boy, you may need to stay on the wheel barrow if you can't treat tools better than that". I see you trying to make the best of a bad thing ("the folding yardstick fits in the nail apron nicely"), but the pain still exists, doesn't it?
David
It is a Lufkin. How did you know?
Never mind, I looked on line and Lufkin is all I found.
I used to have an 8 foot rule, but something happened to it.
The pain does exist.
Last edited by lowell holmes; 04-12-2017 at 10:04 AM.
Funny thing you mention this (not about breaking it, thats just sad) I just recently started using one quite often while building my cabinets. Can't believe I was missing out on this the whole time!
Keep your mouth shut and nobody will know how stupid you are....I should have listened!
I have an aluminum one and a thin steel one marked "Germany". I seldom use them since many years ago I failed to unfold one completely when cutting some special wood for an employer. That makes stuff too short
I use one all the time best way to get inside dimensions and open old style beer bottles
--
The most expensive tool is the one you buy "cheaply" and often...
I use a tape for rough cuts and framing. I use a 6 ft. wood rule for cabinet work. I have 3 wood rules in the shop, 2 have never been used. Saving them for a back-up.
Army Veteran 1968 - 1970
I Support the Second Amendment of the US Constitution
When I was younger I used to play with my Dad's folding rule. I don't recall ever breaking one. Here is a Stanley folding rule I inherited from my grandfather who was a carpenter.
IMG_0362.jpg
It is a 2 foot model.
Last edited by Lee Schierer; 04-12-2017 at 2:15 PM.
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
I have one as well. I don't use it. I keep it in a display case. I remember my Father had one . That was over 60 years ago.
I'm in the process of building my workshop (I'm an electrician, but woodworking rookie), and I use a Lufkin wooden rule for all my measurements under 6 feet, and most under 8 feet. Back in the olden days when I was attending a vocational school, you had to start with a wooden rule, (If memory serves, the teachers recommended Lufkin). I believe there is also a Larkin one available.
Please help support the Creek.
"It's paradoxical that the idea of living a long life appeals to everyone, but the idea of getting old doesn't appeal to anyone."
Andy Rooney
My dad always said never walk around with a folding rule unfolded - that's how they usually get broken.
I carry one in my back pocket every day in my shop. I have had the same 2 6 footers for over 40 years
I have two of the Lufkins. One was from my dad, so I've had it for about 35 years. The first joint has always been loose. About 4 " from one end is a saw kerf mark. My dad would measure from the tablesaw blade to the fence, while the saw was still running.
Just ordered a Lufkin. Broke my lastone about 35 years ago....
Mark McFarlane