Originally Posted by
Warren Lake
I drill my bases 1/2" holes one each corner put a 1/2" bolt to 3/8" chain to it then lift from the chain above the machine, I also run small chains to keep all chains located and put carpet sections on before I chain it so its protected done ten machines probably more this way never an issue but its a bit unconventional, My thinking is im always lifting from the base and not tables or other things. Its also worked well for changing heights like onto a trailer or different levels say five feet up or down, done machines to 2,500 lbs that way but could go higher. If I undestand your post you want to put it on a base if its pre assembled base the pallet jack will be in the way so not quite clear on what you are thinking