Hi all...I'm having an issue that I assume is user error but I don't really know what I could be doing wrong.
I've got a 3HP SawStop. Love the saw from a power, fit/finish, quality of components perspective. I'm having some issues with things binding as I rip sheet goods or other long pieces. Pieces tend to bind half way through; to the point that I've had to turn off the saw and wrestle the piece loose. I've tried both the splitter and the riving knife/dust collection hood thing.
I took the fence and aligned it with the T grove and it runs out a few mm on the far end...IE when you align it on the track, you can see a bit of the table on the far end of the saw. Well under half a centimeter, but you can see it with your naked eye. So I guess my question is am I somehow feeding the material incorrectly into the saw, or is that little bit of misalignment most likely causing the issue? I just assumed it was right out of the box (however it was aligned was how it was supposed to be); is "perfectly square" the goal with the fence, or is it supposed to run out just a touch to give you some clearance as you come through the blade?
Apologies if this is a stupid question. But I'm sure ya'll know A LOT more about this than I do!