I just bought a DW733 plainer on offerup and shame on me I didn't test it first. The cutter works but it was missing a cog on the shafts that drives the feeders. Got a new one installed but the rollers seem to have trouble turning. I can spin them by hand with medium effort but as soon as the wood touches the roller they stop. It is almost as if the motor doesn't have the torque to spin them under any load. Tryed it with almost no load on it, just lowered it to barely touch the wood and it still stops.
Please if anyone knows what's going on can you assist me? Turns out it is very hard to push and pull the wood through without the rollers.
Thank you