Results 1 to 3 of 3

Thread: Another beal buffing question

  1. #1
    Join Date
    Feb 2013
    Location
    Delta, BC
    Posts
    64

    Another beal buffing question

    I've used the 3 part beal system on a walnut oil finish with good results, but is it useful on a tung oil finish?

  2. #2
    Join Date
    Jun 2011
    Location
    Colby, Washington. Just across the Puget Sound from Seattle, near Blake Island.
    Posts
    931
    Summing it up in a single word: Test. Pretty sure it will work.

    Russell Neyman
    .


    Writer - Woodworker - Historian
    Instructor: The Woodturning Experience
    Puget Sound, Washington State


    "Outside of a dog, there's nothing better than a good book; inside of a dog it's too dark to read."

  3. #3
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Trevor Mills View Post
    I've used the 3 part beal system on a walnut oil finish with good results, but is it useful on a tung oil finish?
    It will work on any hardening oil finish after it is completely hard.

    BTW, I don't always use all three parts depending on the wood. For example, on dark woods the white diamond can look bad if it gets embedded in open pores and natural voids.

    JKJ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •