Results 1 to 6 of 6

Thread: Applying Wipe on Poly(ArmrSeal) with item being finished in the verticle position??

  1. #1
    Join Date
    Jan 2009
    Location
    N.E, Ohio
    Posts
    3,026

    Applying Wipe on Poly(ArmrSeal) with item being finished in the verticle position??

    Can this be done successfully or is it better to have it in a horizontal position?

    Thanks
    George

    Making sawdust regularly, occasionally a project is completed.

  2. #2
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    9,648
    Wipe away, George. Arm-R-Seal is never applied thick enough to run, or shouldn't be, so orientation is not a factor. It might be physically easier to work on something when it's horizontal, but it's not a requirement.

    john

  3. #3
    Join Date
    Jan 2009
    Location
    N.E, Ohio
    Posts
    3,026
    Thanks John. I figured you would chime in and have an answer.
    George

    Making sawdust regularly, occasionally a project is completed.

  4. #4
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    9,648
    You know, doing a piece vertically is a good teacher for how thin you should apply Arm-R-Seal. If it sags or runs, it's not thin enough.

    John

  5. #5
    Join Date
    Mar 2016
    Location
    Coppell, TX
    Posts
    908
    +1 on all of John's wisdom - nice thing about using blue shop towels with Arm R Seal is the towel doesn't adsorb much, so vertical surfaces should be a breeze

  6. #6
    Join Date
    Apr 2013
    Location
    Issaquah, Washington
    Posts
    1,320
    I do it all the time, no problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •