Results 1 to 2 of 2

Thread: File specifications disappearing - ULS M300 & Corel X3

  1. #1

    File specifications disappearing - ULS M300 & Corel X3

    Tonight, I ran three files, and what is very weird, is that a simple star file to be cut in acrylic I sent, with settings/speeds in Corel were Power=30, Speed=2, PPI=1000, from memory.

    The M300 console showed them as P=0, S=0, PPI=0, and did nothing.

    The next file tried - same problem. Swapped the cable (LPT lead) and no difference.

    I'm wondering what could be deleting the setting figures?

    Time for another shutdown and reboot of the PC. I did reboot the laser, four times, and that made no difference.

    Any suggestions would be welcomed! Thanks.
    Best wishes,
    Ian



    ULS M-300, 55w made 2002 with rotary. Goldenlaser 130 watt, 1300x700 made 2011.
    Flat bed 2500x1300 150/90watt 2 tube laser, 2018 model.
    Esab router, 1989, 4.5 x 2.0 m, conv. to Tekcel, and modded a 2nd time.
    HP L260-60". Roland PNC-1410. Mimaki GC-130 SU.
    Screenprinting carousel 6x4 and 7x4 ft 1-arm bandit vac table.
    Corel Draw X3, Illy, Indesign & Photoshop CS2 & CS5, Enroute 4
    Pencil, paper, paintbrush, airbrush & dagger-liners & assorted other stuff.

  2. #2
    Solved: what looked like hairline outlines were actually fat outlines.

    But I still have a sticky Y axis drive problem again like last October.
    Best wishes,
    Ian



    ULS M-300, 55w made 2002 with rotary. Goldenlaser 130 watt, 1300x700 made 2011.
    Flat bed 2500x1300 150/90watt 2 tube laser, 2018 model.
    Esab router, 1989, 4.5 x 2.0 m, conv. to Tekcel, and modded a 2nd time.
    HP L260-60". Roland PNC-1410. Mimaki GC-130 SU.
    Screenprinting carousel 6x4 and 7x4 ft 1-arm bandit vac table.
    Corel Draw X3, Illy, Indesign & Photoshop CS2 & CS5, Enroute 4
    Pencil, paper, paintbrush, airbrush & dagger-liners & assorted other stuff.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •