Hello all,
I recently purchased a LV Shooting Plane. While preparing to make a shooting board for it, I found David Barron's version (https://www.youtube.com/watch?v=Y90bK_03zXk&t=239s), which is different that other's I've seen posted here at smc.
The board is longer (~27") and sits along, rather than running across, the bench to allow longer long grain shooting. A notch on one corner keeps the reach manageable and cleat holds the board in my leg vise. Thought I'd try it out and find it works great. Here's my version:
IMG_1307.jpg
And I'll echo Phil's shout out to LV--the plane is a fine piece of kit! Also works splendidly without a shooting board, here trimming then end of a desktop that was elevated on a couple pieces of ply and using the bench as a reference surface.
IMG_1300.jpg
Had to sell some chisels to swing the purchase, but well worth it.
Best,
C