Results 1 to 5 of 5

Thread: A different approach to sharpening the v gouge

  1. #1

    A different approach to sharpening the v gouge

    Some may find this interesting.
    https://www.youtube.com/watch?v=V8IX3FDcSYs&t=186s
    Paul Hamler

  2. #2
    Join Date
    Jun 2007
    Location
    Clinton Township, MI, United States
    Posts
    1,469
    Thanks for showing this, I will have to try it. Your "skate" seems to be a larger, flatter area than the "keel" suggested by Chris Pye. So am interested in comparing the two.
    Mike
    From the workshop under the staircase, Clinton Township, MI
    Semper Audere!

  3. #3
    Join Date
    Nov 2006
    Location
    TX, NM or on the road
    Posts
    631
    Thanks for the video.

  4. #4
    Can't say I'm impressed. It's kind of a veiner now rather than a v-tool and doesn't cut cleanly. I'll do it by hand when I actually have to remove real amounts of metal. Everett Ellenwood does it well https://www.youtube.com/watch?v=Kh6i8fRseng 6 minutes in.

  5. #5
    Join Date
    May 2003
    Location
    San Diego, California
    Posts
    14
    Thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •