I am having a little problem with tailstock alignment on my Grizzly G0800. I have notified tech support and will keep on working with them. First time around they said there was no means of adjustment, but to check debris / cosmoline. After cleaning there was an improvement so I thought the problem was over. But there is still this misalignment. It only makes a difference on tall chalices when I am trying to keep the cup stable when turning the outside of the chalice.
Any ideas here? I will definitely keep moving with Grizzly tech support.
Here are pictures of the misalignment and the alignment plates on the bottom. When I loosen the 3 hex screws, the plate still seems immovable