I got a very good deal on two cabinet saws and want to set one up for crosscuts and one for ripping.
The additional issue is one is an Delta RT-31 12"/10" with scoring blade. When the 12" blade is on it, it sticks up 1" at all times. I want to make this the crosscut saw as I think the additional height would be most useful with crosscutting, using sleds, etc.
If I put side extensions on each and make them out-feed tables for each other, I am concerned the 1" sticking up will get in the way during some ripping operations.
If I put them next to each other, it would be tight side to side with the space they are in. The area is 11ft x 16ft. There is no room anywhere else for them to go.
Wondering what some of you would do in this situation.
thanks.