Came up with something new today, after tying to glue broken totes back together using plastic wrap, rubber bands and clamps with limited success possibly because of the glue jobs and nails done earlier.
I found some brass tubing that fit perfectly, well with a little reaming with a rat tail file, roughed up the brass and coated it with glue and slid it in and
reinstalled it on the plane the only thing I'll do different next time will not be to try to put them back together first as the tube will hold everything in alignment, I hope.
I will be grateful for your thoughts and comments.
Rick
IMG_2730.JPG
IMG_2731.JPG