Wedding Vows in Waveform

[Jeremy Brown]

I had someone ask me to do a waveform for them. They supplied the wood, stained it and most importantly the waveform.


I believe the wood is Alder, it measures 31" x 10.5" x.75", He used an Ebony stain which turned out pretty good. I was afraid it would soak into the wood and might not let the vcarve have a crisp contrast but it wasn't an issue.

Bits used
.25 3 flute end mill
.0625 2 flute end mill
30 degree v- bit
60 degree v bit

Turned out pretty good, although I did have some issue with the flatness of the board

I used V-carve Pro for the CAM/CAN

[David Coburn]

very cool..
david

[Hoang N Nguyen]

That's an awesome idea!!

[Tom Romick]

That's an awesome idea!!

I second that emotion. This idea has a ton of room for diversity.

[Frederick Skelly]

Nice job making that!

It's definitely unique and you can see a certain type of person would love that (technophiles). The possibilities are endless - imagine adding a small voice chip that plays back the actual words when you push the button. (I've seen small ones for greeting cards.) And that certain type of person would be back for repeat business when having their first child ..... for one of the baby's heartbeat ...... for themselves and/or the grandparents.

The video itself was well done and the music fit perfectly with what was being done by the router. The vid would be an excellent sales/marketing tool at an event or on tyour website!

One day I'll try CNC. I have a few more hand planes to buy. One day!
Fred

[David Falkner]

That's very nice, Jeremy! What software did you use for the design or CAD?

David