For years I have used Wagner Conversion guns for finish work with good/acceptable finish on projects. I've been thinking recently about upgrading to a nice Fuji turbine unit, perhaps a Q4, or a higher quality conversion gun. I like the conversion gun since I'm experienced with it and would have a new learning curve with a turbine unit. Also I have a 5hp air compressor on a 60 gal tank so air supply is not a problem. My projects seem to be about a 50/50 mix of clear finish/stain and paint. Everyone seems to love the Fuji type turbine units but I can see there are both pros and cons with
it as well as conversion units. Your thoughts on Conversion vs. Turbine pros & cons? Any recommendations on high quality Conversion or Turbine units to consider for purchase?