30W Fiber Laser purchase

[Erik Goetheer]

There is a separate ground cable attached at the back of the fiber laser, which you can connect to an earth point. In my case not really needed though because the laser is also grounded through the regular power cable (I checked) and all wall sockets are connected to earth.

[John Lifer]

I did connect it to my conduit, as machine is sitting under the outlet and wire provided was adequately long, but it really isn't needed. I think that the Chinese totally ground thru separate line in most cases and their power lines aren't provided with good ground. oh, check your email Erik!

[Erik Goetheer]

....oh, check your email Erik!

Noticed 2 mails coming in, will read them later today. But thanks in advance.