Quote Originally Posted by Andy Giddings View Post
Another downside to mine is the power - the flow is too much for the J/P dust chute in the planer position (it forces the normally closed jointer chute open) so I had to clamp the chute in place :-) First world problems
I do have one issue at the lathe - the air flow is far stronger than needed and as a result the sound is very loud. I step over to the bandsaw and open that blast gate a little which reduces the airflow at the lathe a little and greatly reduces the sound. I'm wondering if a few laminar flow vanes in the pickup nozzle would help.

JKJ