I have just plumbed the majority of my shop with 6" 2729 PVC sewer pipe. I also used some SDR 35 which has the same OD when I ran out of 2729. I just received 25 feet of 6" clear vinyl .025 hose from Wynn. The OD of the hose is a LOT smaller than the OD of the pipe, so I need some kind of adapter.
When I was using 4" hose on my previous shop I would get the common black plastic fittings, saw the reduced end off (the part that slipped into the hose) and then would glue cut-off slip fitting onto the end of my PVC pipe. It doesn't look like any of these black fittings are available for 6" hose; I checked Oneida, Clearview and Wynn and none of them have assorted 6" fittings. So, how do the rest of you connect your 6" flex to your 6" sewer pipe?
Thanks