Biesmeyer or Delta Splitter or Micro Jig

[David LaRue]

I have both the Delta and the Miro Jig spliter. You can use a full or tin kerf with either one. You cannot tilt with Miro Jig. I I had to choose one I would go with the Delta.

[Corey Hallagan]

Bart, I have the 35.00 Delta splitter on my Delta Contractor Saw. It will work with both kerf blades. I don't know if it makes a difference if it is on a Unisaw or CS or if it makes a difference if it is left or right tilt. Just works on mine.

Corey

[John Keane]

Bart, I have a thin kerf after market Delta splitter and it works great for either thin kerf or regular. I have only observed pics of the Beismeyer splitter. It looks exactly the same as the Delta with the higher Beis price.