In the form of an older "rip" saw. Search-fu has failed to id the saw's maker, sooo
IMG_1057 (640x480).jpg
One: Any idea which maker clipped the saw plate like this? top and bottom?
IMG_1059 (640x480).jpg
Two: Bolts that came from the saw...not split nuts.
IMG_1060 (640x480).jpg
But they are flat in profile. They are also skinnier than "newer" bolts..
IMG_1063 (640x480).jpg
As for the medallion..
IMG_1061 (640x480).jpg
It is a sunken one, marked as a Warranted Superior. I refinished the handle, and reset the bolts..
IMG_1064 (640x480).jpg
Atkins? Simmonds? This is a nice etch, though
IMG_1058 (640x480).jpg
Saw is marked as a 7ppi. 26" long, straight back...but no nib..
IMG_1066 (640x480).jpg
Any ideas as to who made "The Farmer" saw?
Might be worth sharpening up as a user. It only cost $3
One of two saws I cleaned up tonight....the other was a 20"long, 10ppi, D8.....as in the "8" was inside of the "D" on the etch..it was a tad cheaper..at $2.50...
Any other details needed, to help with the ID?