Evening,
My table saw came with zci and tonight I tried for the first time making a 45 degree cut. I tried tilting the blade without it on and it started to get hung up on the insert. I lowered the blade all the way down, turned on the saw and slowly raised the blade (assuming this was okay as I had done it with my dado insert). The blade never really cut the insert, got really hot, and I could smell the insert burning. Turned off the saw and abandoned my attempt till I could get some advice from y'all. Do I need to buy a specific insert for a 45 degree cut? Something not right with my saw? It's a SawStop contractor saw if that is of any relevance.
Thanks