Hello everyone,
I have been casually posting in the laser engraving section of this website, but this marks my first thread post outside of that realm.
The reason is, I already own a Laser cutter, but I am looking to get a CNC router. I have contacted many Chinese factories and I am still learning about this machine. I am a pretty quick learner, so I am not worried about using the machine (it will be my first CNC router).
I need to know if any of you have had any experience in a Chinese routers capable of a full sheet (1300mm x 2500mm, which is a full sheet of 4' x 8').
Specs I have looked at:
Working size 1300×2500×200mm
3kw air cooling spindle
stepper motor
leadshine driver
Delta inverter
vacuum work table
vacuum pump
dust collector
DSP control system
The reason I need the machine is that I want to get into making wood signs and also modern furniture.
I would love to hear your suggestions to what factory I should be contacting for a quality machine. I don't mind paying the extra money for a Chinese machine. I am not interested in a USA machine. I understand the risks of Chinese machines, as I have worked with many Chinese machines before but never a CNC router. There is good quality Chinese machines and bad quality as well.
My budget is around $6000USD FOB. I have received quotes from different factories with the same above specs for less than my budget.
My questions in a nutshell:
What Chinese manufacturer do you suggest?
What do you think of the DSP control system?
Thank you all very much for your help!