I recently had a 24x24 two-car two-story garage build and am going to use the bottom half for woodworking stuff. The left side holds mostly stuff that will stay in the same place like my big rolling tool box, air compressor, bench and staircase. The right half is where I am setting up most of the larger tools which for the most part all are on mobile bases so they can be stored against the wall and pulled out into the middle of the floor if needed. The upstairs I would like to use for other things.
So on that right side where the tools are is a 12 x 24 space where I would be installing the dust collector. This is a hobby only and will never make me a penny so I have no intention on spending thousands of dollars if I can make it work for Less. The current lineup of tools that I will need dust collection on are.
Cabinet saw
Router table
Lunchbox planer
Ridgid spindle sander
I don't see how I would hook up dust collection to a drill press or bandsaw or if that would even be necessary.
The question is will the single canister grizzly G0548zp Have enough CFM and filter enough fine dust or would I need the dual canister grizzly g0562zp at a minimum? I was also considering adding a super Dust Deputy in front of the single canister grizzly if it had enough CFM to spare and wasn't getting enough filtration.