You run the risk of having it turn out like a patchwork quilt.
You run the risk of having it turn out like a patchwork quilt.
"Anything seems possible when you don't know what you're doing."
My name is earl, and i'm an amateur. I like white oak and dark walnut together, on some pieces. Red oak--when I use it--I don't normally introduce a second wood, though I have used some mesquite accents on a few pieces. Same with cherry, like it by itself.
earl
A project I recently finished, though I'm totally an amateur:
IMG_20170701_133752.jpg
I ran out of oak and used hickory, and it looks a lot like oak.
I must be a amateur cause in the kitchen build for my house going to have walnut floors with ash island and chery cabinets and some maple countertops mixed in with solid surface. And trim going to be hickory.
I seen entertainment cabinet today that was oak with some walnut inlays, thought would look crazy but actually looked good.
To the OP. If you have the tools, cut some veneer off the oak and make the legs out of whatever cheapness you can find, then veneer them.
-Lud
Mission style QS oak with Hard maple top. Customer wanted maple top so he could see to tie flies better. I tried to talk him out of it but actually turned out alright.
IMG_0112.jpg
Red or White Oak?Wood that would match well with oak?
Personally, I favor white paint with Red Oak.
My wife insists on Red Oak with Red Oak.....
& yes, that was a huge bone of contention a year ago when I redid the stairs in the family room. I wanted white risers & she didn't.
"Life is what happens to you while you're busy making other plans." - John Lennon
Marty - very cool piece, obvious built for a specialized purpose. Do drawers pull out normally, or possibly fold out to be open on the sides of the fly tier?
Oh, and it's of course very ametuer as Mr bassette would say. 🙄
Nice kitchen Martin! I like the natural wood and painted combination. And the floor matches well too. Wood flooring in a kitchen introduces vexing matching challenges!
In the nautical environment there is what is termed the "Herreshoff finish" which is widely admired. It combines natural brite (varnished) wood with painted wood. It is found both inside and outside the boat. On the attached photo (but search "herreshoff finish" in a search engine and get lots of results) the hull and deck are painted, the shearstrake (not as large as it should be), cockpit combing and hatch as well as the transom are all mahogany, spars are spruce. It goes well together. Down below you will likely have painted oak ribs with painted Atlantic White cedar strips or planks. But in my opinion, even if brite, white oak seems to go well with Honduran mahogany, Cedar, Spruce, and painted finishes.
"the mechanic that would perfect his work must first sharpen his tools.” Confucius