I would like to see some of your deep engrave work on your chinese 30watt fiber system. If you have stuff on ther USA built systems please post that too. Also higher wattage is welcome to but let me know your wattage.
I would like to see some of your deep engrave work on your chinese 30watt fiber system. If you have stuff on ther USA built systems please post that too. Also higher wattage is welcome to but let me know your wattage.
20 Watt, aren2.jpg
Just text on aluminum AR lower. Maybe 30 seconds total time. A couple of thou deep.
scroll.jpg
Scrollwork. Did in two parts. Mark in the pivot first to make sure it was centered in the circle, and then the rest.
It took maybe 20 sec for the first and a couple of three minutes for the remainder. Not real deep except for some small items. Which are again about 2 thou deep.
steeleng.jpg
about a thou deep. Just about 15 seconds.
Woodworking, Old Tools and Shooting
Ray Fine RF-1390 Laser Ray Fine 20watt Fiber Laser
SFX 50 Watt Fiber Laser
PM2000, Delta BS, Delta sander, Powermatic 50 jointer,
Powermatic 100-12 planer, Rockwell 15-126 radial drill press
Rockwell 46-450 lathe, and 2 Walker Turner RA1100 radial saws
Jet JWS18, bandsaw Carbide Create CNC, RIA 22TCM 1911s and others