I am finishing some basic shop cabinets I built, and I find the Satin version of the above product FAR too glossy for me. Rather than attempt to rub it out, which I have very limited experience doing, would adding some Lee Valley Tung Oil (what I have on hand) serve to dull the finish on the subsequent coats? I have never seen a satin finish as glossy as this out of the can - it is much closer to gloss than satin to my eye. I used to use Sherwin-Williams Fast Oil Varnish, which I really liked, but it has not been available here for years now. All the stores here sell Minwax; there are very few other brands of varnish available.
Thanks, Joe.