I have done a few searches to find an answer to my question but it is still unclear to me. I am considering purchasing an Incra miter gauge. I have always used an auxiliary fence with my current basic miter gauge to prevent blowout at the back of the cut. Is the Incra designed so the metal is the backing surface to prevent this. When I see the Incras pictured they typically don’t have any wood attached. Do people actually use them without a wood sacrificial fence? I see the company has a few iterations of the jig. Is there one that has the 1º increments but allows for a simple screw-on wooden fence without the built-in moveable fence features. I have seen pics posted by forum members with fancy wooden extendable fence attachments. I don’t really need the settable fence stop features, just an accurate base with screw holes for the wood fence for angled cuts. Is this something that is available…. am I missing something and would no longer need a wooden fence. Oh…. by the way I have a Sawstop and have seen the posts regarding accidental trips. Thanks guys.