Results 1 to 6 of 6

Thread: Walnut slab

  1. #1
    Join Date
    Jul 2013
    Location
    Whitewater Ks
    Posts
    584

    Walnut slab

    I had a bunch of walnut milled about 6 years ago and had a 8/4 slab cut out of the middle of the tree so it's like 20" wide and 12' long. I had it stickered and it dried pretty flat, but then I pulle it off the stack to get to some wood beneath it. Well I forgot to put it back on the pile and it got rained on a couple times and it cupped about 1.5" across the width. I put it back on the pile and put a bunch of weight on top, but it hasn't moved much. Would it do anything to get it wet again?
    Only one life will soon be past
    Only whats done for Christ will last

  2. #2
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    12,298
    Quote Originally Posted by Jesse Busenitz View Post
    I had a bunch of walnut milled about 6 years ago and had a 8/4 slab cut out of the middle of the tree so it's like 20" wide and 12' long. I had it stickered and it dried pretty flat, but then I pulle it off the stack to get to some wood beneath it. Well I forgot to put it back on the pile and it got rained on a couple times and it cupped about 1.5" across the width. I put it back on the pile and put a bunch of weight on top, but it hasn't moved much. Would it do anything to get it wet again?
    Jesse, I'm guessing it probably won't press back into flat.

    I haven't tried it with walnut but I have with other woods - wet the cupped side. For construction lumber I usually just lay it on the ground with the cupped side down and the convex side in the sun and even 2x12s straighten out pretty quickly. For hardwoods I might try a different method with a spray bottle. However, the differential stress might cause cracks, I can't guess. If you don't need to save the entire length you might cut a piece off one end and experiment. Also, any way you can use it like it is, for example rip into narrow pieces, flip every other one then glue? (assuming it has had enough time to dry again after it was soaked in the rain)

    JKJ

  3. #3
    I agree with John. Pressing it flat will not relieve the stress that caused the cupping in the first place. You could lay it on the grass outside with the cupped side down for a couple of nights and see what happens. There is nothing to lose by trying. If it does flatten out, re-sticker it so that both sides are getting air flow and let it air dry to equilibrium again.

  4. #4
    Join Date
    Apr 2008
    Location
    Virginia
    Posts
    3,178
    Jesse,

    If the slab was cut out of the true middle of the log it probably contains the pith so you probably want to rip it right through there since the pith usually cracks/checks.

  5. #5
    I have had good luck with walnut not cracking at the pith. Oak and cherry on the other hand are terrible.

  6. #6
    Join Date
    Jul 2013
    Location
    Whitewater Ks
    Posts
    584
    I'll try getting it wet and putting it in the sun. It just seems like if it originally dried flat, it should be able to go back.
    Only one life will soon be past
    Only whats done for Christ will last

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •