It looks like a guy (or Gal) can loosen one knob, and pull out of the telescope.. remove the guard arm extension to get all but the main arm out of the way??
As far as overarm guards go, Excalibur IS a generally liked one, Yes ?
Marc
It looks like a guy (or Gal) can loosen one knob, and pull out of the telescope.. remove the guard arm extension to get all but the main arm out of the way??
As far as overarm guards go, Excalibur IS a generally liked one, Yes ?
Marc
I have the Excalibur guard. There is a lever where it attaches to the table that you disengage and the whole guard swings towards the back of the saw out of the way.
Thank you Cary ! Marc
Got it. Marc
I had the Excalibur guard on the cabinet saw I used to own and really liked it a lot.
--
The most expensive tool is the one you buy "cheaply" and often...
Hi, Excalibur are no longer available, I had an Excalibur on a General 650 saw.
The current version is this one.
http://www.kingcanada.com/detail/xl-1014/1152
I have it on a Hammer B3, works very well.
Completed Installation.jpg
regards, Rod.
Any USA dealers that carry the new version?
Sawstop makes a similar one.
http://www.acmetools.com/shop/tools/...hoCI1gQAvD_BwE
Yep, Sawstop is the current US variant.
If at first you don't succeed, redefine success!