Saw blade Sharpen Service by Mail - recommend please ?

[Marc Jeske]

Need a good circ blade sharpening service, mostly for common 10" for tablesaw, and 9" for odd old saws.

I have a mix of Carbide and regular Steel in the 9" size.

Somewhere I saw Steel is WAY cheaper than Carbide to sharpen. ? ?

I live in the woods, so location does not matter..would ship USPS.

Certainly I have Googled, but trust recommendations here.

Also have done advanced search here on SC, even in quotes... all I get is Neander type stuff on Handplane blades and for $80,000 chisel sets.

NOT interested in DIY !!

Lastly - I use the 9" on old Rockwell miter boxes that mandate "Blades that are rated 7000 rpm".. So does "Sharpening" also typically include the balancing this requires ?

Thank you all, Marc

[Sam Puhalovich]

Cooks sharpening service ... San Marcos TX

[Earl McLain]

Carbide Processors in Washington State.
earl

[Steve Eure]

I've used Dynamic Saw Sharpening in Buffalo NY recently and was very happy. Return was fast and the price was reasonable.

[Robyn Horton]

#2 for Dynamic in Buffalo , they sharpen all my blades and have one of the best blade sharpening machines right there in house
watch the video http://dynamicsaw.com/

[glenn bradley]

Carbide Processors in Washington State.
earl

I've been a CP customer for years and have never been disappointed. I source my blades there as well but, I'm on the left coast.

Steel blades I would just replace in the 9" size. Quality carbide blades can be sharpened many times thereby reducing the cost over the life of the cutter.

[Marc Jeske]

The thing w the steel blades is.. they are basically unavailable @ 9", and rated 7k rpm.. so, want to get about a dozen old ones sharpened. Marc

[Vince Shriver]

Cal-Orc Carbide
2919 N. Pacific Hwy
Medford OR 97501
(541) 772-2293


AA Carbide
1275 West 2100 South
Salt Lake City, UT 84119
(801) 486-4881

[John TenEyck]

Another satisfied Dynamic Saw customer. I actually live close enough to take my blades there and pick them up when they are done. I've been in their shop several times now and know both Dan and Steve (father and son) pretty well. If you follow the link posted above you will see that these guys use top end equipment and know what they are doing with it. Even as an engineer I was taken aback when Dan was telling me about having to control the cutting oil temperature to something like +/- a couple of degrees to assure grinding tolerances. And their prices are very good.

John

[Bill McNiel]

Dynamic Saw does a really nice job.

[Andy Giddings]

+x for Dynamic

[Peter Kelly]

Daniel Callari
dan@dynamicsaw.com
(888) 528-0808

[Marc Burt]

I send my stuff to dynamic as well.

[Rick Potter]

Nobody sends them to Forrest?

I am about ready to send half dozen to them, but I haven't used them before. Should I rethink?

[Brian Lefort]

Forrset
Leitz
Valley machine knife, West Springfield, MA
Woodcraft. (they do a great job mail-in)