20171006_180808 (Small).jpg20171006_180818 (Small).jpg20171006_180750 (Small).jpg20171006_180756 (Small).jpgDoes anyone have any ideas on a good dust collection setup for a 12 inch sliding compound miter saw. It is mainly used for 90 degree cuts, however, I do use it for 45 degree cuts sometimes. I currently have it on a bench and when I ran my DC, I ran a 6 inch port right above it. I see a lot of dust hoods when I google it, but was wondering thoughts on the best route to go making one and if anyone has some good tips or advice.
If I have to build something larger, I can always move the upper cabinet on the left side.