recommendations for table saw?

[Pat Barry]

Add a mobility kit, they aren't expensive.

As others have mentioned, the saw on CL is certainly the better option of box store junk.

I think my Rigid saw from HD is as good or better than the CL one linked in this thread. It certainly has a better mobility kit already built in. I bet the fence is better also. Plus you are buying new and not some who knows how well used equipment.

[Ted Reischl]

I think my Rigid saw from HD is as good or better than the CL one linked in this thread. It certainly has a better mobility kit already built in. I bet the fence is better also. Plus you are buying new and not some who knows how well used equipment.

Only thing I disagree with is the comment about the fence. It is very, VERY hard to beat a UniFence, so do not bet the fence is better also.

[Mike Hollingsworth]

Buy a track saw, seriously.

This

You will never again do without it.
Very Precise Laser Like Cuts. Even cross cuts.

A contractor saw will never give you the same quality of cut.

Check these out before you invest in old technology.

my $.02

[Adam Herman]

The rigid is good, i have the ts3650 myself, but the fence is not my favorite and it would have been more than 300 new. very similar to the CL saw, and the unifence is better. I got my 3650 for $350 about 3 years ago in nearly new condition.