So first I am not a novice nor an expert. I have some knowledge of finishing but have never worked with either of these products. I am hoping you experts out there will have a solution.
I have the cabinets in my camper that are clear coated with a water based poly. ( Bought it this way ) I want to tone them to Amber such as in a vintage trailer. I have often used Zinzeer
amber shellac thinned but not sure at all it will be the best choice for this project. I don't know a lot about Dewaxed Shellac or possibly a tinted gel top coat. Maybe general finishes with an amber transtint.
I really truly don't know which way to go. My main concern is adhesion over the water based poly. Maybe it should't be but I have never top coated over that.
Any and all info would be GREATLY appreciated.
I have No ego so bring it on !!!!
Palmer