And one that needed rebuilt....Had the "remains" of a Fulton #3416 and decided to try to get it working, again.....
IMG_2227 (640x480).jpg
Had to find a handle for the rear. There WAS a brass, phillips headed screw behind the handle....replaced with a steel, slotted head one...
IMG_2228 (640x480).jpg
Same with the front knob..now has a steel screw in place of the brass one...dug around to find a chipbreaker and a iron that would work. Cleaned the body up
IMG_2225 (640x480).jpg
Test drive wasn't too hateful Set this aside, and cleaned up another...
IMG_2230 (640x480).jpg
Slightly bigger....and longer..
IMG_2232 (640x480).jpg
It was covered in dust and grime. Cleared all that away. Found a name on the toe..
IMG_2233 (640x480).jpg
STANLEY Rule and Level Co. No. 28
IMG_2234 (640x480).jpg
About the same size as a No. 6...
Maybe later this weekend, I can get the No. 31 all cleaned up...we'll see.

Will need help get this item up the stairs and out of the shop..
IMG_2229 (640x480).jpg
Don't want spiders to drop down onto the varnish.....need this out of the shop.