A few years back, was in need of a bench for the Dungeon Shop....it had to be easy to move, an easy to build....at the time, I was still working a "day job", too.
Well, dug around, did a bit of dumpster diving....and laid out a few tools. Work area was out on the patio, as the weather was fairly decent...started about Lunchtime...
SDC15826.jpg
Had a saw bench set up...
SDC15828.jpg
Ripped a waterbed's side (2 x10) down for leg stock..
SDC15827.jpg
Meet my Handy-Dandy Jobsite bench. A second 2 x 10 was cut to length for the benchtop, and notched for the legs...
SDC15829.jpg
Handsaw to finish the cut. Legs needed a notch cut, too..
SDC15833.jpg
A few saw cuts, some chisel work, and cut a stretcher to length...I used LONG screws to assemble the parts...
SDC15839.jpg
Got to this point, I could start to use it a bit AS a bench....planed down a couple rough boards to make an apron...
Had to send the Boss out for more screws....stay tuned...