I'm hoping that someone here might be able to help me. I've searched through the site and didn't find anything relevant.
The nut that holds the front pulley onto the "pulley insert" (as it's called in the schematic - item 7C in the attached drawing) at the top of the shaft came off - probably during our recent move. Long story short, the pulley insert is completely chewed up. I've already got replacement parts inbound and they should be here in a week.
So I'm obviously going to need to disassemble it. The schematic is only going to get me so far, and I want to avoid as much trial-and-error as possible.
Any advice is truly appreciated.
Screen Shot 2017-10-20 at 9.12.31 PM.jpg