I re-turned a couple of Applewood rough outs that have sat for better than 20 years, as I didn’t have a wood chuck yet then, I used short screws to hold the piece on a faceplate.
Of course the holes in the top where turned away, but in the bottom they where still present, luckely there was enough wood to remove the holes, as I don’t like to glue on some felt as I did years ago , but the reason for the bottom shape
The bowl is about 24cm X 9cm or 9 ½” X 3 ½”
I also added 2 spoons I carved from slightly spalted Elm wood.
All comments welcome
Applewood bowl 2.jpgApplewood bowl & spoons.jpgApplewood bowl bottom 1.jpgApplewood side vitw.jpg