Ouch! Lost one they are 1/4-32 UNEF x 1/2"
Will have to manage without for now; any ideas on how to get a die that size?
Ouch! Lost one they are 1/4-32 UNEF x 1/2"
Will have to manage without for now; any ideas on how to get a die that size?
I'd ask at st james bay tool.
This vendor has a lot of odd taps and dies. It might change from time to time:
http://www.victornet.com//subdepartm...-1-2/1350.html
If something isn't listed it may show up later. The list seems to be kept current. They also are good to work with over the phone.
My recollection is they have a $25 dollar minimum order. That may have changed. Look for a few other things you can use.
My suggestion would be to double check the threads on the screw you need. The three thumb screws with shoulders on my #55 were all just checked and have 28 threads per inch.
jtk
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)
Going to get a die 1/4-28 and make my own thumb screw Thanks for your help