I see Laguna has a "starter set". Are there others? 'seems to me the chip limiters are a good idea for odd ball hand fed pattern kinda' stuff. TIA!
I see Laguna has a "starter set". Are there others? 'seems to me the chip limiters are a good idea for odd ball hand fed pattern kinda' stuff. TIA!
Decided to skip the limiters and go with an amana set with a steel head. I see they offer a 100mm & a 120mm head. Any suggestions on what size to get?
Rod I have an SCM shaper with an inch and a quarter spindle that I will be using this set on
I'm running the 120mm head on a 5hp grizzly. I see no reason for the 100 over the 120 on a industrial shaper.
Hi, the main reason is spindle speeds.
Many of the smaller shapers don't have a low spindle speed so they need smaller cutters, along with the lack of strength of the spindle.
Pick a cutter that has a cutting circle equal to the guide ring you have, or plan to purchase.
The head I have has a 100mm cutting circle...............Rod.
That makes sense.