Results 1 to 3 of 3

Thread: Yeti Engraving w/Rotary

  1. 11-13-2017, 4:11 PM #1
    Ulisses Garza
    Ulisses Garza is offline [OP] Member
    Join Date
    Nov 2017
    Posts
    2

    Yeti Engraving w/Rotary

    Hello
    have purchase a new fiber machine but have some problems to engrave a yeti cup
    i really aprecciate your advice
    i want a dark engraving but looks so brown


    Machine Specs
    20w Fiber Machine Raycus
    Lens F-theta F=290mm 1064nm
    Rotary Chuck style
    Ezcad 2.12

    Yeti 88mm Diameter






    Regards from Mexico (Taco Country)
    20171113_150215.jpg20171113_150218.jpgaaaa.jpgaaa22.jpg
    Reply With Quote Reply With Quote
  3. 11-13-2017, 10:00 PM #2
    Bill George's Avatar
    Bill George
    Bill George is offline Contributor
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,482
    That is more or less the color you get on stainless. You can experment and get it darker, but you do not need a rotary or expensive Yeti to do that.
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
    Reply With Quote Reply With Quote
  4. 11-15-2017, 12:44 PM #3
    Neville Stewart's Avatar
    Neville Stewart
    Neville Stewart is offline Member
    Send a message via AIM to Neville Stewart
    Join Date
    Feb 2003
    Location
    Austin, Texas
    Posts
    534
    The problem with a large image on a round surface is you'll go from perfect focus for annealing(black smooth ) to cutting. That's why you have that brownish mark. Rotary is better for a large image but slower than a CO2 & cermark.
    355 - 10400 : )
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules